含不凝性气体蒸汽浸没射流冷凝压力振荡实验研究

实验研究了不凝性气体（空气）含量、水温和蒸汽质量流速对蒸汽浸没射流冷凝压力振荡特性的影响，实验工况横跨冷凝振荡（CO）区和稳定冷凝（SC）区。结果表明：对于纯蒸汽射流，压力振荡主频随水温的升高而降低，振荡强度随水温的升高而升高；在CO区，振荡主频和振荡强度均随蒸汽质量流速的升高而升高；在SC区，振荡主频随蒸汽质量流速的升高而降低，振荡强度基本上不随蒸汽质量流速的变化而发生改变；对于含空气射流，随空气质量分数的增加，振荡主频总体呈下降趋势，振荡强度先迅速下降后小幅上升，在空气质量分数为0.05～0.1区域内振荡主频和振荡强度均存在极小值。     

In‐plane shear damage behaviours of 2D needled C/SiC composites

Understanding the in‐plane shear behaviour of composites is essential to establish the design basis for practical applications. This study aims to investigate the shear damage behaviours of 2D needled C/SiC composites by various characterization techniques. The effect of layer arrangement on shear modulus and strength was discussed via shear stress‐strain responses. The shear strain field evolution and uniformity variation were studied by digital image correlation. It shows that the uniformity of shear strain field changes with the shear load, and the shear strain field evolution consist of 5 stages. The electrical resistivity measurement results indicate that structural deformation and damage evolution caused the electrical resistivity change. Furthermore, the damage evolution has a double effect on the electrical resistivity variation. The acoustic emission monitoring shows that the shear damage evolution is a 3‐stage nonlinear process before failure. The shear damages were categorized via acoustic characteristics. Besides, the postfailure behaviours were also discussed in this study.     

Robust orientation control of multi‐DOF cell based on uncertainty and disturbance estimation

Multiple degrees‐of‐freedom (multi‐DOF) cell orientation control is a vital important technique involved in single cell surgery applications. Currently, few studies have been performed toward automation of multi‐DOF cell orientation control using robotically controlled optical tweezers. In this paper, a robust control framework is developed to perform multi‐DOF cell rotational control with consideration of model uncertainties and external disturbances. Both simulation and experimental studies are presented to illustrate the performance of the proposed control strategy. The main contributions of this work lie in that this is the first time to develop a unified framework to achieve multi‐DOF cell orientation control without the need for accurate dynamic model parameters and/or any knowledge about uncertainty characteristic, which greatly enhances the robustness of the overall system.     

Evaluation of dynamic modulus measurement for C/C-SiC composites at different temperatures

The determination of elastic properties at application temperature is fundamental for the design of fibre reinforced ceramic composite components. An attractive method to characterize the flexural modulus at room and high temperature under specific atmosphere is the nondestructive Resonant Frequency Damping Analysis (RFDA). The objective of this paper was to evaluate and validate the modulus measurement via RFDA for orthotropic C/C-SiC composites at the application temperature. At room temperature flexural moduli of C/C-SiC with 0/90° reinforcement were measured under quasi-static 4-point bending loads and compared with dynamic moduli measured via RFDA longitudinally to fibre direction. The dynamic modulus of C/C-SiC was then measured via RFDA up to 1250°C under flowing inert gas and showed an increase with temperature which fitted with literature values. The measured fundamental frequencies were finally compared to those resulting from numerical modal analyses. Dynamic and quasi-static flexural moduli are comparable and the numerical analyses proved that bending modes are correctly modeled by means of dynamic modulus measured via RFDA. The nondestructive RFDA as well as the numerical modeling approach are suitable for evaluation of C/C-SiC and may be transferred to other fibre reinforced ceramic composite materials.     

Fabrication of 0.24Pb(In1/2Nb1/2)O3-0.42Pb(Mg1/3Nb2/3)O3-0.34PbTiO3 transparent ceramics by conventional sintering technique

0.24Pb(In_1/2Nb_1/2)O₃-0.42Pb(Mg_1/3Nb_2/3)O₃-0.34PbTiO₃ transparent ceramics were fabricated by a conventional sintering technique. Through optimization of sintering conditions of calcination and sintering temperatures and time, the obtained ceramics showed high optical transmittance of 53% and 71% at light wavelengths of 1300 and 2000 nm, respectively. The ceramics showed a rhombohedral to tetragonal phase transition at ~120°C and a tetragonal to cubic phase transition at 222°C. These transition temperatures were higher than those of 0.67Pb(Mg_1/3Nb_2/3)-0.33PbTiO₃ ceramics. In addition, the ceramics had a ferroelectric hysteresis loop, a large piezoelectric constant d₃₃ of 407 pC/N, and a planar electromechanical coupling factor k_p of 52%. These results suggest that the transparent ceramics may be used as a temperature-stable, linear electro-optic material.     

Gamers,Surfers, Social Media Users: Unpacking the role of interest in English

Across stages of acquisition, second language (L2) competencies are contingent on the variation among individuals learning the language, in both informal and formal learning contexts. This study investigates a group of outliers whose extreme test scores serve as a foundation to examine them as individuals. The study addresses the outliers' characteristics as good L2 readers but poor first language (L1) readers. Combining quantitative (test results, survey, and language logs) and qualitative (focus groups and interviews) data among 21 adolescents in Norway (aged 16–17 years), the study identifies dimensions of individual language use in L1 Norwegian and L2 English. Findings revealed that they explained their English proficiency by the role of interest and their extensive use of English technology and tools outside school. In‐depth analysis identified three profiles: the Gamer, who spends up to 8 hr daily playing online games while using English mainly; the Surfer, who spends hours on the Internet, searching for authentic language situations, commonly involving English; and the Social Media User, who produces and consumes information in English through social media. Additionally, the Gamers read printed novels voluntarily outside the classroom. This study offers unique perspectives and new directions for future L2 research.     

Common due date assignment scheduling for a no-wait flowshop with convex resource allocation and learning effect

This article addresses the no-wait flowshop scheduling problem with simultaneous consideration of common due date assignment, convex resource allocation and learning effect in a two machine setting. The processing time of each job can be controlled by its position in a sequence and also by allocating extra resource, which is a convex function of the amount of a common continuously divisible resource allocated to the job. The objective is to determine the optimal common due date, the resource allocation and the schedule of jobs such that the total earliness, tardiness and common due date cost (the total resource consumption cost) are minimized under the constraint condition that the total resource consumption cost (the total earliness, tardiness and common due date cost) is limited. Polynomial time algorithms are developed for two versions of the problem.     

Individual-based multi-objective optimal structured treatment interruption for HIV infection

In this paper, based on the measurable quantities from an individual patient that has infection to human immunodeficiency virus (HIV) and his/her condition is near to acquired immune deficiency syndrome (AIDS), individual-based multi-objective optimal treatments have been proposed. Firstly, the most effective parameters of the patient in computing Long-term non-progressor (LTNP) equilibrium are derived using global sensitivity analysis (GSA). To accomplish GSA effectively, Latin hypercube sampling (LHS) and partial rank correlation coefficients (PRCC) are utilized to rank each of the parameters based on each state of the 5-dimensional model. Then, these results are used by Dempster–Shafer (D–S) evidence theory (DSET) to rank the most effective parameters comprehensively. Now, these effective identified parameters are estimated using extended Kalman filter (EKF), which its covariance matrices are optimized based on particle swarm optimization (PSO) algorithm. Thus, the proposed methodology gives a calibrated model corresponding to the individual patient. Based on this calibrated model, the LTNP equilibrium related to the individual patient is derived. Using the derived individual-based LTNP equilibrium optimal structured treatment interruption (STI) strategies are extracted by defining suitable multi-objective optimization problem and solving it through using non-dominated sorting genetic algorithm-II (NSGA-II). The results demonstrate that the proposed optimal treatments are able to effectively reach LTNP equilibrium with using the minimum and maximum drug usage of 3.6% and 35.1% of full drug usage treatment. Meanwhile, the different optimal treatments give the decision-makers enough flexibility to choose the suitable treatment based on existing facilities and necessities.     

Broccoli leaf powder as an attractive by-product ingredient: effect on batter behaviour,technological properties and sensory quality of gluten-free mini sponge cake

Broccoli by-products, in particular leaves, are rich sources of nutritional and bioactive components thus could constitute a valuable food additive. Although an upsurge in quantity of gluten-free products is observed further studies are required on improvement of their nutritional quality and palatability. This study aimed to investigate the influence of broccoli leaf powder (BLP) on dough behaviour, and technological characteristics and sensory quality of gluten-free mini sponge cake (GFS). Broccoli leaf powder replaced an equivalent amount (2.5%, 5%, 7.5%; w/w) of corn and potato starches in GFS formulation. Applied BLP increased the instrumental firmness of GFS but sensorial attributes (elasticity, crustiness, mastication and adhesiveness) were similar to the control. All broccoli GFS were vividly green, had small size pores properly distributed. Among them, sample with 2.5% BLP was distinguished for its desirable sensory quality, despite a slightly perceived cabbage aroma and taste. Moderate amount of BLP allows to preserve a good quality GFS improving its attractiveness and palatability.     

Developing high-performance laminated Cu/TiC composites through melt infiltration of Ni-doped freeze-cast preforms

Nacre-inspired laminated composites have been proven to possess a unique combination of strength and toughness. In this study, we fabricated nacre-mimetic Cu/TiC composites via unidirectional freezing of aqueous TiC slurries containing different amounts of NiO additives, followed by ice sublimation, carbothermal reduction of NiO to Ni during sintering and then gas-pressure infiltration of the Cu melt. The introduction of Ni greatly facilitated the densification of ceramic lamellae and enhanced the interfacial bonding between Cu and TiC. The resultant composites displayed outstanding damage tolerance and anisotropic electrical conductivities. Specifically, for an ～31?vol% TiC–Cu composite containing 24?wt% Ni in the ceramic lamellae (based on the TiC content), a fracture toughness (K_Jc) of 72.5?±?1.0?MPa·m^1/2, work of fracture of 53.4?±?3.5?kJ/m², bending strength of 725?±?11?MPa and longitudinal electrical conductivity of 22.7?MS/m (～60% of the Cu matrix) were achieved, which were approx. 81%, 536%, 122% and 97% higher than those of the Ni-free composite, respectively. Noticeable toughening was demonstrated to be a consequence of multiple cracking, plastic deformation and uncracked-ligament bridging of the metal layers, as well as crack deflection and blunting. On the other hand, significant strengthening resulted from tailoring the microstructures in the ceramic layers and at the Cu/TiC interface as a result of Ni doping. We believe that the facile strategy adopted herein provides an effective way to solve the problems of wetting and bonding related to metal infiltration and can be readily extended to the preparation of other nacre-inspired metal?ceramic composites.